Start with a walk round
Before planning anything, walk round the outside of the building with a notepad or your phone. Look at every side, including the back, the bin store and the service yard. Note down:
- How much glass there is, and how high it goes
- What the walls are: brick, cladding, render
- Gutters, downpipes, and any flat roofs or box gutters
- Roof covering, and whether there's moss on it
- Solar panels, and how they're reached
- Signs, canopies and entrance areas
- Car parks, paths, forecourts and their surfaces
- Gum, weeds and staining on the ground
- Trees close to the building
Photos of each side make the next step much quicker. They're also what a contractor needs to price the work.
The regular jobs
Windows
Shop fronts every two to four weeks. Offices and schools every four to eight weeks. Industrial units every three to six months. Many buildings split it, with entrances more often than upper floors. Our guide on how often commercial windows should be cleaned covers this in detail.
Signs
With the windows. Fascia signs are often within pole reach, so they cost very little extra on the same visit.
Bin stores
Every one to three months. They smell, attract pests and stain the ground if left.
The once-a-year jobs, by season
Spring
- Solar panels, ahead of the long days. Our solar guide explains how to check if it's worth it
- Second gutter clear, if you have trees close by
- Car parks and paving after the winter, with weeds out of the joints
- Gum on entrances and precincts after the winter
Summer
- Roof moss cleaning, in a dry spell so the biocide can work
- Cladding, when it's warm and dry
- Schools: the big jobs in the long holiday, when the site is empty
- A spring or early summer window clean for anything you only do a few times a year
Autumn
- Gutters and downpipes, in late autumn once the leaves are down. Book early, as it's the busiest time
- Flat roof outlets and box gutters checked
- Paths and steps cleared of leaves and algae before they get slippery
Winter
- Check downpipes are running during heavy rain
- Look for overflow marks and damp patches on walls
- Review the year's job reports and photos
- Set next year's budget and book the spring and summer work
Get the order right
Some jobs make a mess of others. Doing them in the right order saves paying twice.
- Roof first, then gutters. Moss from the roof ends up in the gutters
- Gutters and roof before cladding and windows. Run-off from both streaks the walls and glass
- Cladding before windows. Wash water from cladding lands on the glass
- Pressure washing last. Everything else drips onto the ground
If several of these are due in the same season, book them as one job with one contractor. It's usually cheaper, and the order is someone else's problem.
Paperwork to keep on file
For every job, keep:
- The risk assessment and method statement, received before work started
- The contractor's public liability certificate, with the expiry date checked
- The job report, with before and after photos
- A note of anything found, like broken gutter brackets or cracked panels
- The invoice, with your PO number if you use them
This is what shows the building has been looked after if you ever need to prove it: to an insurer, a landlord at the end of a lease, or the maker of your cladding or panels. Our guide to RAMS for exterior cleaning covers what to check in the safety paperwork.
Plan round how the building runs
- Shops and restaurants: before opening
- Offices: before staff arrive, or at weekends for the big jobs
- Schools: half terms and the summer holiday
- Industrial units: round deliveries and shift changes
- Blocks of flats: with notice to residents, especially for parking and cherry pickers
Tell your contractor about site rules, inductions, key holders and parking at the start. It saves time on the first visit.
Budgeting for it
Put the regular jobs, like windows and signs, in as a monthly or per-visit cost. The yearly jobs, like gutters, solar and paving, are a fixed cost each year. Roofs and cladding come round every few years, so it's worth setting a little aside each year rather than finding the whole cost at once. Ask your contractor for fixed prices for the year in one go, so you know the total before you set the budget.
One contractor or several
You can book a window cleaner, a gutter firm, a roof cleaner and a pressure washing company separately. That's four sets of insurance and RAMS to check, four invoices and four people to chase.
We do all of it. Windows, signs, cladding, paving, gum, gutters, roofs and solar, for single buildings and sites across the UK. In Essex we do the work ourselves. Elsewhere, a local specialist we've vetted does it, with insurance checked and RAMS agreed first, and we stay your one contact. See all our services, or send us the postcode and a few photos and we'll price the whole year.






